Error found!
-
- Posts: 11
- Joined: Mon Jul 27, 2009 7:11 pm
- Location: UK
Error found!
It happened 2 times when I am playing the game in solo.
1. When I tried to load a different map.
2. When in game play building a solar collector(Arm)
It suddenly pop-up a message box and said my computer does not support debugging stuff:
An error has occured
Debugging information could not be logged bcause this isn't not supported for your system.
Please report to this forum. And I did. Please fix this problem if you can. Thanks!
1. When I tried to load a different map.
2. When in game play building a solar collector(Arm)
It suddenly pop-up a message box and said my computer does not support debugging stuff:
An error has occured
Debugging information could not be logged bcause this isn't not supported for your system.
Please report to this forum. And I did. Please fix this problem if you can. Thanks!
TA rocks. But TA3D ROCKS!!! Get it? rocks. and ROCKS!!!
-
- Posts: 11
- Joined: Mon Jul 27, 2009 7:11 pm
- Location: UK
Re: Error found!
Oh sorry about the hold on. The internet got cut off for a while. Here is the files.
Err... there is a problem. When I tried to upload it it says :
The extension bak is not allowed.
It applys to both the log and the cfg file
Err... there is a problem. When I tried to upload it it says :
The extension bak is not allowed.
It applys to both the log and the cfg file
TA rocks. But TA3D ROCKS!!! Get it? rocks. and ROCKS!!!
- zuzuf
- Administrateur - Site Admin
- Posts: 3281
- Joined: Mon Oct 30, 2006 8:49 pm
- Location: Toulouse, France
- Contact:
Re: Error found!
ok, can you send me your cfg file ?
I've noticed this in the logs:
I suspect some unsupported setting is enabled.
I've noticed this in the logs:
Code: Select all
[Mon Jul 27 20:22:40 2009] [infos] [OpenGL] Vendor: Intel
[Mon Jul 27 20:22:40 2009] [infos] [OpenGL] Renderer: Intel 915GM
=>;-D Penguin Powered
- Balthazar
- Moderator
- Posts: 2055
- Joined: Wed Nov 01, 2006 4:31 pm
- Location: Russian Federation
- Contact:
Re: Error found!
You can compress in to zip or rar and upload.Johnsonpapa wrote:Err... there is a problem. When I tried to upload it it says :
The extension bak is not allowed.
It applys to both the log and the cfg file
-
- Posts: 11
- Joined: Mon Jul 27, 2009 7:11 pm
- Location: UK
Re: Error found!
Oh ok I'll upload those in a RAR file.
- Attachments
-
- Log and Cfg file.rar
- The log and cfg
- (12.32 KiB) Downloaded 752 times
TA rocks. But TA3D ROCKS!!! Get it? rocks. and ROCKS!!!
- zuzuf
- Administrateur - Site Admin
- Posts: 3281
- Joined: Mon Oct 30, 2006 8:49 pm
- Location: Toulouse, France
- Contact:
Re: Error found!
I've seen those settings in your cfg file:
disabling some or all of them may fix the problem (you may have to delete the cache directory between tests)
You can also try to disable shaders completely with:
since you have an Intel chip, using the following settings can help increasing frame rate if needed:
Code: Select all
Show Shadows = true;
Detail Texture = true;
Use Texture Compression = true;
You can also try to disable shaders completely with:
Code: Select all
Disable GLSL = true;
Code: Select all
Render Sky = false;
Low Definition Map = true;
=>;-D Penguin Powered
-
- Posts: 11
- Joined: Mon Jul 27, 2009 7:11 pm
- Location: UK
Re: Error found!
Ok I'll try thanks for your help.
TA rocks. But TA3D ROCKS!!! Get it? rocks. and ROCKS!!!
-
- Posts: 11
- Joined: Mon Jul 27, 2009 7:11 pm
- Location: UK
Re: Error found!
I've got an other error and sorry for double posting. The error occured before the game start when it is loading GUI.
There are two different situations.
First one:
After I read your post I disabled some of the settings. After that the right and the bottom part background gone completly wrong. It is either black or some random coloured stripes. Well that dont matter as soon I can still click on the buttons. When I tried to load the game. It crashed when it loads to GUI. Then I gone to the situation below.
Second one:
Since you said disabling all the settings might solve the problem. Well I did keep the full screen stuff but I think that will not effect the program. I disabled all of it (exept the full screen) then I tried to start the game in solo (since that goes first then the multiplayer mode.). The loading went well. The loading bar gone all the way right. That means the loading has finished. Then the game crashed again.
I uploaded the log and cfg file like last time incase you need it. If you need more file I can provide it to you if you can post what else is needed. Thanks.
There are two different situations.
First one:
After I read your post I disabled some of the settings. After that the right and the bottom part background gone completly wrong. It is either black or some random coloured stripes. Well that dont matter as soon I can still click on the buttons. When I tried to load the game. It crashed when it loads to GUI. Then I gone to the situation below.
Second one:
Since you said disabling all the settings might solve the problem. Well I did keep the full screen stuff but I think that will not effect the program. I disabled all of it (exept the full screen) then I tried to start the game in solo (since that goes first then the multiplayer mode.). The loading went well. The loading bar gone all the way right. That means the loading has finished. Then the game crashed again.
I uploaded the log and cfg file like last time incase you need it. If you need more file I can provide it to you if you can post what else is needed. Thanks.
- Attachments
-
- TA3D .log and .cfg.rar
- (16.33 KiB) Downloaded 754 times
TA rocks. But TA3D ROCKS!!! Get it? rocks. and ROCKS!!!
- zuzuf
- Administrateur - Site Admin
- Posts: 3281
- Joined: Mon Oct 30, 2006 8:49 pm
- Location: Toulouse, France
- Contact:
Re: Error found!
did you clear the cache directory ?
it may help when you disable texture compression.
Also which data files (totala1.hpi, totala2.hpi, etc...) do you use ?
it may help when you disable texture compression.
Also which data files (totala1.hpi, totala2.hpi, etc...) do you use ?
=>;-D Penguin Powered
-
- Posts: 11
- Joined: Mon Jul 27, 2009 7:11 pm
- Location: UK
Re: Error found!
No I haven't move anything from the cache directory.
In that folder there are:
cache_info.txt
d (a file not folder) 0kb
Loads of 3dobase stuff...
tmpgfx images...
and loads of tga files
The TA3D folder has:
totala1.hpi
totala2.hpi
totala3.hpi
totala4.hpi
rev31.gp3 (since the installation told me to copy this to the folder.)
That is all the file copied to TA3D by the installation ms-dos program.
And the others are just files like NL.dll already exist in the TA3D folder.
In that folder there are:
cache_info.txt
d (a file not folder) 0kb
Loads of 3dobase stuff...
tmpgfx images...
and loads of tga files
The TA3D folder has:
totala1.hpi
totala2.hpi
totala3.hpi
totala4.hpi
rev31.gp3 (since the installation told me to copy this to the folder.)
That is all the file copied to TA3D by the installation ms-dos program.
And the others are just files like NL.dll already exist in the TA3D folder.
TA rocks. But TA3D ROCKS!!! Get it? rocks. and ROCKS!!!
- zuzuf
- Administrateur - Site Admin
- Posts: 3281
- Joined: Mon Oct 30, 2006 8:49 pm
- Location: Toulouse, France
- Contact:
Re: Error found!
there is nothing that helps in the logs .
Remove the cache_info.txt file, it'll force TA3D to refresh the cache.
If it still doesn't work, you can try 0.6 alpha packages, it can change lots of things since it's not more based on Allegro but on SDL.
Remove the cache_info.txt file, it'll force TA3D to refresh the cache.
If it still doesn't work, you can try 0.6 alpha packages, it can change lots of things since it's not more based on Allegro but on SDL.
=>;-D Penguin Powered
Who is online
Users browsing this forum: No registered users and 26 guests